Using the pressure pot principle pre-mixed resin systems are drawn into the machine under vacuum, actively degassed, then dispensed under pressure into the mould cavity. Processing requirements of single part epoxy materials such as Hexcel's RTM6 and Cytec Engineered Materials have led to heated systems complete with higher levels of control and monitoring.
General Specification
The HypajectTM system is highly versatile:
- Standard 6 litre capacity homogenisers are complimented by 'special order' sizes, ranging from 0.3 to 30 litre.
- Removable joining seals permit easy maintenance.
- Internal venturi vacuum generator (to 100mBar abs) for loading and degassing material.
- Capable of injecting at pressures ranging from 0.1 bar to 10 bar.
- Able to inject quantities from 50 to 6000cc.
- Standard heated machines have 150oC capability with full PID control. Dependant upon specification.
- Range of monitoring instruments and outputs available including weight, pressure and temperature.
- Suitable for use with virtually all thermosetting resin systems, including:- polyester, vinylester, methyl methacrylate, phenolic, single and multi component epoxies.
To Determine the Machine Specification Choose from the Recommended Configuration Options For Example:-
Standard polyester, epoxy etc - Options 2,3,8
Standard polyester, epoxy with requirements for general heating - Options 2,3,8,9,10
Hexcel RTM 6 - Options 2,3,6,7,8,9,11,13
High visocity, single part epoxies - requiring heating prior to processing - Options 2,3,6,7,8,9,12
Click here to see the options available. 
Standard Machine
- 6 Litre frame mounted homogeniser with 2 removable seals.
- Frame mounted control cabinet.
- Venturi vacuum load/degas system.
- Regulated pressure inject system.
- Actuated load valve Actuated injection valve.
- 3/8" load and injection pipe.
- Turbo Autosprue open/close switch.
About Nida-Core | Products | Training | Technical Data
Technical Services | Brochure Download | Careers | Contact Us
|
