Using the pressure pot principle, pre-mixed resin and catalyst are drawn under vacuum into the machines homogeniser, actively degassed and then dispensed under pressure into the mould cavity.
Standard 3 & 6 litre capacity homogenisers are complimented by 'special order' sizes, ranging from 0.3 to 30 litre.
Can inject as little as a cupful of pre-mixed material.
The homogeneous mixing will eliminate cure profile distortions caused by inaccurate catalysation.
Using the pressure pot principle, pre-mixed resin and catalyst are drawn under vacuum into the machines homogeniser, actively degassed and then dispensed under pressure into the mould cavity.
