OPTION 2
Standard Spares Kit - Part Ref: 2074
Spares kit contains a set of all serviceable seals, resin valve diaphragm, a selection of pneumatic fittings, 4mm and 6mm nylon.

OPTION 3
Mould Vacuum Service - Part Ref: 2085
Additional venturi driven vacuum system provides vacuum levels to 100mBar abs. System includes On/Off switch, vacuum gauge, isolator and 6mm quick fit vacuum outlet. Controls are incorporated into main control cabinet and system operates from internal machine air supply.

OPTION 4
External Pressure Source - Part Ref: 2096
System comprises 3 way stainless steel ball valve and relevant connections to separate the pressure in homogeniser from the air used to operate the machine control circuit. This permits connection of secondary pressure source (0-10Bar) including other gasses e.g. Argon for use directly with the homogeniser.

OPTION 5
External Vacuum Source - Part Ref: 2106
System comprises 3 way stainless steel ball valve and relevant connections. This enables the use of external vacuum pumps allowing higher vacuum levels to be reached in the Homogeniser.

OPTION 6
Weight Transducer with di gital readout - Part Ref: 2117
Homogeniser is suspended from strain gauge transducer and readout is monitored on digital readout with 4 digit LED display unit incorporated into the control cabinet. A tare button is also included in the desktop control cabinet. Weighing resolution is 1g. 0-10v analogue output is incorporated as standard. Alternative monitoring outputs are available on request. System may be used to monitor flow rate if output is plotted against a timebase.

OPTION 7
Pressure Transducer with digital readout - Part Ref: 2124
Pressure transducer is incorporated into machine homogeniser. Full range of operating vacuum/pressure levels may be monitored and displayed on digital readout unit with 4 digit LED display incorporated into the desktop control cabinet. Monitoring resolution is 10mBar. 0-10v analogue output is incorporated as standard. Alternative monitoring outputs are available on request.

OPTION 8
Internal Homogeniser Thermocouple - Part Ref: 2125
K type thermocouple probe is incorporated into machine homogeniser to monitor actual resin temperature. Connector provided outside homogeniser for connection to external monitoring equipment.

OPTION 9
Readout for Internal Homogeniser Thermocouple - Part Ref: 2126
3 digit LED readout unit for internal homogeniser thermocouple. Readout is incorporated into desktop control cabinet.

OPTION 10
2 Channel Heating System - Part Ref: 2127
System is designed to heat resin homogeniser in two sections. System comprises one 110v 800w and one 110v 300w mica band heaters. Power supplies and full PID control units are incorporated into the desktop control cabinet. System allows heating of homogeniser to 150oC max and control of homogeniser temperature to +/- 1oC. A heat shielded actuated injection valve is included. Two secondary K type thermocouples are provided for monitoring purposes. Note: See optional item No. 13.

OPTION 11
3 Channel Heating System - Part Ref: 2129
As option 10 with the addition of a 1.5m long 3/8" heated injection hose with 200o C capability. Power supply and full PID control are incorporated into the desktop control cabinet. A heat shielded actuated injection valve is included and a secondary K type thermocouple is provided for monitoring purposes. Note: See optional item No. 13.

OPTION 12
5 Channel Heating System - Part Ref: 2130
As options 10 and 11, but with the addition of a heated loading melt plate and heated intake pipe. Power supplies and full PID control are incorporated into the desktop control cabinet. Two secondary K type thermocouples are provided for monitoring purposes. Self-sensing,automatic height control maintains the resin-load pipe/melt-plate at a consistent height below the resin surface. Actuated load valve, with control switch incorporated in the machines control cabinet.

OPTION 13
Resin Container Height Control (manual) - Part Ref: 2131
Consists of pneumatic cylinder with hydrocheck motion control. Enables raising/holding/lowering of resin container from control switch incorporated into machine control cabinet. Note: Only available as an option with item Nos. 10 and 11.

• See high temperature test tool variable thickness with PID temperature control, controls can be built into Hypaject MkIII cabinet.
• Designed to connect to Turbo Autosprue and PVSensor system.

Back to Hypaject MKIII Details page